• Effective PM2.5 removal
• Effective formaldehyde removal
• Effective allergen removal
• Particle CADR: 488 m³/h and more
• Particle CCM: P4
• Energy efficiency value: high efficiency level
• Formaldehyde CADR: 100 m³/h (230 m³/h available on request)
• Formaldehyde CCM: F4
• Energy efficiency value: high efficiency level
• 10 million ions/cm³ high concentration negative ions
• Effectively removes PM2.5, dust, dust mites, pollen, bacteria, odors, soot,
secondary cigarette smoke, and other air pollutants. Purification efficiency:
99.98%.

• 20 m² living room, air purification in 9 minutes
• Suitable area: 34–58 m²
• 488 m³/h particle CADR value
• 100 m³/h formaldehyde CADR value
• Living room 36 m² – 16.2 min
• Living room 18 m² – 8.1 min
• Living room 11 m² – 4.95 min

• The primary alloy dust filter can filter large particulate dust particles, dander,
pollen, floating particles, and other pollutants.
• Multi-layered corrugated aluminum mesh structure with low initial resistance,

high dust capacity, and durability.
• Lightweight, compact design, easy to install.
• Can be cleaned and reused using compressed air.

• Easy cooling function can extend the life of the fan motor.

• The decomposition of the cold catalyst does not require UV, high temperature,
or high pressure. Under normal living conditions, it can perform a catalytic
effect, controlling pollution.
• Can decompose various harmful gases, as well as catalyze formaldehyde,
ammonia, benzene, TVOC, hydrogen sulfide, and other harmful gases, reacting
with oxygen in the air to create water and carbon dioxide.
• Long-lasting effect: during the catalytic reaction process, when used without
external damage, it is effective for five years. Main synchronization with the
formaldehyde evaporation period, thus providing good long-term control of
formaldehyde.

• We use environmentally friendly PP honeycomb material, which has cellular
structure holes filled with columns of activated carbon grains with high carbon
content. Compared to traditional activated carbon filters, it has better
aerodynamic properties, high adsorption efficiency, and low wind resistance
coefficient.
• Activated carbon as an effective catalyst can significantly improve the ability to
remove various harmful gases, can adsorb and decompose formaldehyde,
toluene, xylene, ammonia, and other harmful substances. Removal efficiency
exceeds 99%, with fast and high saturation adsorption capacity.
• We use coconut shell activated carbon, with technical parameters exceeding
900 (technical parameters), equivalent to a filtration area of 18 football fields,
carbon density: 200 g ± 20 g.

• We use imported fiber non-woven fabric covers from the USA, which have
antibacterial, moisture-proof, mold-resistant properties and do not allow
bacteria to multiply.
• This filter destroys bacterial cell walls, cell membranes, prevents cytoplasm
leakage, and interrupts the metabolic processes of microorganisms, thus
inhibiting the growth and reproduction of microbes, effectively removing mites
and bacteria.

• The filter is made of high-temperature welded fiber. Fine particles are filtered
and combined with a multifunctional filter. The HEPA filter removes fine
particles larger than 20 nanometers in diameter, including bacterial mold, dust,
allergens, and some viruses. World Health Organization publications indicate
that avian flu, human flu virus, and Legionella bacteria are all larger than 20
nanometers.
• The filtration accuracy is 99.9%, with a filter pore size of 0.01 microns. The HEPA
filter is a new generation of high-level air purification material. It can remove
dust (99.97%) and sterilize (99.99%) without any energy consumption at room
temperature. Filtration accuracy of 0.1 μm and larger particles (smoke,
partitions, dust, etc.) – adsorption level reaches 99.97%, with high bacteria￾
killing ability and strong inhibition against common bacteria.

Used to inhibit bacterial growth. With a humidification function, it can be activated in
dry air.
• Natural humidification does not rise too high, so indoor humidity does not
exceed the norm;
• Water consumption is lower, so there is no need to frequently refill water,
avoiding the inconvenience of constant water replacement;
• The humidification box contains a bacteria growth-inhibiting ball to prevent
bacterial proliferation and avoid secondary pollution;
• Water level reminder – if the water runs out, the control panel will remind you to
refill the water.

High concentration of negative ions (10 million ions/cm³) allows you to bring forest air
into your home without leaving the house. Negative ions can attract indoor dust,
smoke, and bacteria, which are usually positively charged, and their ability to float
freely in the air quickly decreases, thus purifying the air. Negative ions release small
particle negative ions that are beneficial to human health. Negative ions not only
remove dust and purify the air but also promote the synthesis and accumulation of
vitamins in the adult body, strengthen and activate physiological body functions, hence
they are also called “air vitamins.” The high concentration of 10 million ions/cm³ allows
your body to replenish its “vitamin” reserves.

1, 2, 3, 4 – purification modes (manual, automatic, high speed, night), four speeds.
Simple, gentle, and beautiful design, strong connection and sense of integration,
quietly integrates into daily life.
Large screen, clearly visible interface, even elderly people can easily distinguish
functions.
Humidification and dehumidification reminder helps create a comfortable environment
and improve water quality.
Timely cleaning provides a fresh and healthy environment.
Mobile app (optional), touch control, remote control, various control methods.

• Child lock design – after the mode is activated, other buttons will be locked,
effectively preventing accidental touches and injuries.
• No ozone hazard, no radiation pollution.
• Micro switch, power automatically turns off when the cover is opened.
• The body shuts down when the device is overturned.
• High-quality materials used.
• Protection against overvoltage and overcurrent, protection against motor
overheating.
• Ergonomic body handle design to prevent slipping.

• Particle CADR: 488 m³/h
• Operating Principle: Smart Purification
• Particle Accumulation Purification Level: P4
• Negative Ion Concentration: > 10 million ions/cm³
• Formaldehyde CADR (Effective Formaldehyde Removal on Request): 100 m³/h
(can be customized up to 230 m³/h)
• Voltage Rating: AC 220V/50Hz
• Formaldehyde CCM Value: F4
• Rated Power: 95W
• Purification Efficiency (PM2.5, formaldehyde, TVOC, and bacteria efficiency):
• Sterilization Level (Staphylococcus aureus): 99.98%
• Standby Power: 0.6W
• Noise Level: 38.0 dB (low noise)
• Wind Speed Setting: 8 speeds
• Noise Level (high level): 68.8 dB
• Power Cord Length: 1.8 – 2 meters
• Product Weight: 10.8 kg
• Gross Weight: 13.5 kg
• Suitable Area: 34 ~ 58 m²
• Product Size (length, width, and height): 400 × 230 × 661 mm